• Sharp Ar M207 Driver Download
• Windows 10 Arm Drivers
• Sharp Ar M316 Driver Download
• Sharp Arm 165 Driver Download

SDRplay Home Page. Check the box below and then click the 'Start Download' button to download the software. Driver downloads available online. Missing your STRONGARM operator interface drivers? Download the right drivers that you need here. 215.443.3400 sales@strongarm.com.

FEATURES

• FTDI provide drivers and instructions at their web site, download them and use our ARM-USB-TINY-H PID: 0x002a, VID: 0x15BA to install the drivers. I have LPC1227 board and can't program it with your OpenOCD debugger.
• Getting Windows images. There is currently only one legal way of obtaining Windows 10 ARM64 images: download the UUP files directly from Microsoft servers, and build an ISO from them. There are two websites that can do that for you: UUPDump or uup.rg-adguard.net Full desktop builds of Windows 10 ARM32 are not available anywhere (except for a leak, but please read the warning below before.

• Debugs all ARM microcontrollers with JTAG interface supported by OpenOCD
• High speed USB 2.0 with lower latency time, RTCK adaptive JTAG clock up to 30Mhz and higher throughput achieve x3-x5 times faster programming speed than ARM-USB-TINY, can be used with all ARM devices for programming and debugging.
• Uses ARM's standard 2x10 pin JTAG connector
• Supports ARM targets working in voltage range 2.0 – 5.0 V DC
• Supported by the open-source community and OpenOCD debugger software
• Downloadable Windows installer for full featured and open source tools as alternative to the commercial ARM development packages: GCC C compiler, openOCD debugger and Eclipse IDE.
• Works with IAR EW for ARM via GDB server
• Works with Rowley Crossworks IDE
• Works with CooCox IDE
• Supported in Windows, Linux and Mac
• Dimensions 50x40 mm (2x1.6') + 20 cm (8') JTAG cable - ribbon cable included

SOFTWARE

• Additional resources: tutorials, instructions, demo software, customer projects, older drivers and more might be found at the wiki page: ARM-USB-TINY article

FAQ

• Can I use ARM-USB-TINY with EW-ARM?
• IAR EW has support for GDB and works with ARM-USB-TINY-H.

• I am currently using operating system X. It has FTDI drivers, how should I alter them to work with my installation?
• FTDI provide drivers and instructions at their web site, download them and use our ARM-USB-TINY-H PID: 0x002a, VID: 0x15BA to install the drivers.

• I have LPC1227 board and can't program it with your OpenOCD debugger. What do I do wrong?
• LPC1227 lacks JTAG according to the microcontroller's datasheet. The board can be programmed only via SWD (Serial Wire Debug) interface. Olimex OpenOCD debuggers have JTAG by default. You would need an addiitonal adapter – ARM-JTAG-SWD.

• How to install ARM-USB-TINY to work with CrossWorks:

• Test with the FTDI drivers. The FTDI drivers can be downloaded from the following address:
  https://www.olimex.com/Products/ARM/JTAG/_resources/OLIMEX-FTDI-drivers-2-12-04.zip
  There is profile for ARM-USB-TINY in CrossWorks, but if you want to use 'Generic FTD2232' target interface you have to do as follows:

  1. Right click on a blank space in the targets window and select 'New Target Interface > Generic FT2232 Device'.
  2. Right click on the new target interface and select 'Properties' - set the following properties:
     Connected LED Inversion Mask 0x0000
     Connected LED Mask = 0x0800
     nSRST Inversion Mask = 0x0200
     nSRST Mask = 0x0200
     nTRST Inversion Mask = 0x0000
     nTRST Mask = 0x0100
     Output Pins = 0x0F1B
     Output Value = 0x0D08
     Running LED Inversion Mask = 0x0000
     Running LED Mask = 0x0800

  PID: 0x002a
  VID: 0x15ba

  In CrossWorks 1.7 there are Target interfaces for Olimex JTAGs, note that RTCK is not used with a FT2232 design so your JTAG clock should not exceed 1/6 of your target MCU clock or the JTAG will lock up. Start with JTAG divider 10 and decrease until you are able to debug to find your own value for your target.

• What is the difference between ARM-USB-OCD and ARM-USB-TINY?
• ARM-USB-TINY is stripped down version of ARM-USB-OCD, the differences are: no output buffers just current limitation resistor protectors, no RS232, no additional power supply for the target.

• Can I debug high voltage targets with ARM-USB-TINY?
• ARM-USB-TINY is not isolated, but you can use USB-ISO isolator device to protect your PC while debugging high voltage targets.

• Howdy, guys. I can't program my MSP430 and PIC16 boards with your robust debugger. I need help ASAP.
• Technically, it is possible to program targets different than ARM using our OpenOCD debugger. Practically, almost all users use the debugger for ARM programming and only ARM targets are officially supported. There is a reason that the prefix in the name of the debugger is 'ARM-'.

• I am the maintainer of a commercial IDE with custom debugger code. I want to include support for your OpenOCD tools in my software, however I can't find specific information. It is obviously a win-win situation for both parties. Is it possible to provide me with more specific technical information for your debuggers?
• Olimex can provide the necessary information and cooperate with interested parties if they want to add low-cost USB debugger support to their C compilers and IDEs.

Related Products - People who bought this product also bought

ARM debugger with JTAG and SWD interfaces, based on CoLinkEX

High-speed 3-IN-1 fast USB ARM JTAG, USB-to-RS232 virtual port and power supply 5VDC device (supported by OpenOCD arm debugger)

Overview

Your FaroArm^®, ScanArm, Design ScanArm, or Gageworks best with the latest driver. This article shows you how to download the latest or earlier drivers.

After servicing or recalibration of your device, plan to download and install the latest driver BEFORE you use the device. The factory provides the most recent hardware improvements when servicing your device, so using the latest driver may be required.

CAUTION: If you use software or hardware from a third-party vendor who makes FARO compatible products, verify the product is compatible with the latest USB FaroArm driver BEFORE you change the driver.

• If you are using the vendor recommended driver, do not change it.
• If you are not using the recommended driver and the vendor's product is not compatible with the latest USB FaroArm driver, see the earlier drivers list in this article to find the driver the vendor recommends.

Details

1. Download the latest FaroArm driver:

   Version: 6.6.7 Release Date: Dec 2020

   Download Alternate Download Link (Full Version)

2. Download the What's New file to learn what has changed in the latest version.
3. Go to Upgrade the FaroArm USB driver installation instructions.

Earlier Drivers

Click here for details about which versions of Microsoft Windows supports different driver versions and computer processors.

For older drivers not listed above, contact Customer Support.

Hardware Support Notes:

Sharp Ar M207 Driver Download

The latest driver version is compatible with all USB FaroArm and ScanArm models. Model specific, minimum required versions are listed below.

*8-Axis support for the Edge requires an authorized firmware upgrade, contact your local sales representative for details

Windows 10 Arm Drivers

See Also

Sharp Ar M316 Driver Download

Keywords

Sharp Arm 165 Driver Download

faro usb driver, faro arm driver, reinstalling, reinstall, re-install, updating, update, LLP driver, Laser Line Probe driver, OS, operating system, latest driver, current driver, newest driver, new driver, earlier driver, past driver, old driver, dsa